By allowing ads to appear on this site, you support the local businesses who, in turn, support great journalism.
Business also can help conserve water
Placeholder Image

Georgia's Drought Response Unified Command encourages residential and non-residential users, such as businesses, to conserve as much water as possible on a daily basis. Conservation by all Georgians is the key element in statewide efforts to manage water resources during and after the current drought.

“By saving water in daily practices, businesses will also actively contribute to reducing demand on Georgia's water supply,” said DRUC Chairperson Dr. Carol Couch, director of the Georgia Department of Natural Resources — Environmental Protection Division.

Here are a number of water saving tips most businesses can follow:
• Educate employees and co-workers about water scarcity issues and how water conserving practices not only save water, but also money.

• Incorporate water meter reading into existing maintenance, security or cleaning routines to establish baseline use.

• Identify and fix leaks. Look for unexplained trends of increased usage, conduct regular inspections of areas where leaks could occur, check equipment and install monitoring or sub-meter systems.

• Maximize cooling tower efficiency. High volumes of water can be lost as water vapor while performing the cooling function.

• Install water-efficient equipment, such as ultra-low flow toilets (adjust flush valves or install dams on existing toilets); install faucet aerators and high efficiency shower heads; use water-conserving ice makers; and, replace worn out appliances and equipment with water-efficient models.

• Minimize the use of water for indoor and outdoor cleaning.

DRUC comprises the directors of the Environmental Protection Division of the Georgia Department of Natural Resources, the Georgia Emergency Management Agency, the Georgia Environmental Facilities Authority and the Georgia Division of Public Health. It was established by Gov. Sonny Perdue to coordinate the state's role in mitigating the effects of Georgia's ongoing drought. For more information, visit www.droughtjic.org/ and www.conservewatergeorgia.net/.

Effingham ECCA Students Build Electric Car with Hyundai
ECCA electric car
From wiring to problem-solving, Effingham juniors Rowand Smart, left, and Dexter Bohlman tackle the challenges of building an electric car alongside engineering director Aaron Parker. (Mya Taylor / Effingham Herald)

SPRINGFIELD, Ga. — For five months, 10 engineering students at Effingham College and Career Academy spent afternoons with wrenches, wires and instruction manuals, turning boxes of parts into something extraordinary — a working electric car.

The build was part of a partnership between ECCA’s engineering lab and the Hyundai Motor Group Metaplant America in nearby Ellabell. Funded through $150,000 in state grants and supported by Hyundai’s donation of tools, the project gave students hands-on experience in electric vehicle technology while tying classroom learning to one of the region’s most significant new industries.

Finding their place in the project

Junior Dexter Bohlman hadn’t expected to be part of the build. A scheduling error placed him in a higher-level engineering class, and before long he was wiring railings, connecting a key fob and shaping the steering panel.

Much of the work he did alone. The wiring — 250 to 450 terminals in all — was especially tricky.

“You have to figure out how to manage the wires to make it so that they’re less complicated,” Bohlman said. “On the top rail it’s a little bit of a mess, but down there we managed to get it a little more concise.”

For Bohlman, the project became more than an assignment. It gave him experience to add to his aerospace résumé and a sense of ownership in something bigger than himself.

Classmate Rowand Smart also joined by accident, after his schedule shifted. At first, he said, his enthusiasm for engineering was fading. The project changed that.

“It turned into something that I was actually interested in because it’s kind of a hobby working on my truck and seeing the less mechanical and more electrical part of it,” Smart said. “The wiring, the programming, all of that was really interesting.”

Smart’s father and grandfather were both mechanics, and he said their influence helped guide him through the toughest parts of the build.

ECCA electric car
ECCA juniors Dexter Bohlman and Rowand Smart helped turn kits of parts into a drivable electric car — then signed their names on the project to mark their role in the hands-on Hyundai partnership. (Mya Taylor / Effingham Herald)

Learning by doing

Students worked four days a week on the car, often troubleshooting unexpected problems.

“We had to figure out what we were going to do, find the parts, read the instructions before we put it together, and make sure we had the right equipment,” Smart said.

Together they learned not only how to wire circuits and measure voltage but also how to rely on one another.

Engineering Director Aaron Parker said the students’ persistence reflected what he calls the “four C’s” — creativity, critical thinking, communication and collaboration.

A proud moment

By May, the car was ready for its first test run. Getting it out of the lab was almost as hard as building it — four adults and 10 students had to tilt and lift the vehicle through a doorway.

Once outside, the students each took turns driving. For Bohlman and Smart, it was the highlight of months of effort.

“It was probably one of my proudest moments of students, especially upon completion,” Parker said.

The car later went on display at Stemposium, a community event where STEM students showcase their work. Families and staff stopped to admire what the team had built.

Looking forward

Bohlman said he dreams of an affordable electric rally car, while Smart imagines a Mustang with electric power. Both said the project changed how they see engineering.

HMGMA Chief Administrative Officer Brent Stubbs shared his gratitude for the partnership with ECCA. 

“HMGMA is thrilled to sponsor the EV lab at Effingham College and Career Academy. ECCA is teaching young students about electric vehicles and giving them an opportunity to get hands-on experience, so when we learned about their need, we jumped at the opportunity to help. We are proud to be a long-term partner in educating future generations of EV and automobile enthusiasts. We hope one day some of them will become Meta Pros at HMGMA,” Stubbs said. 

As for the car itself, Parker said it will soon get finishing touches — a light and dash cover — before being used to promote the program. Another frame, bright red and untouched, waits for the next group of students to take on.

“At the end of the day we want to set these kids up to be successful adults so that they can be independent when they get out in the real world,” Parker said.